Jezet

home

 

contact

 

homened

 JEZET Restoration Machines bv
 Beatrixlaan 5
 4645 HD  PUTTE
 The Netherlands

 T  +31(0)164606493
 F  +31(0)164606495

 E  info@jezet-restoration-machines.com

 W www.jezet-restoration-machines.com

SPECIFIC ADVANTAGES OF THE JEZET LEAFCASTERS

The JEZET-method ensures short CASTING time and dries at the underside by forced air-suction, therefore non or a minimum impoverishment of text by fibers and moreover there is no risk of moving of loose parts and keeps the pigments better at their place, which prevents the colors from bleeding. The new casted parts of the sheet dry quicker, gives less puddles but evaporation and loosen easier of the fiber-screen.

Big work-surface (unfolded newspaper adaptable on size and dimensions on demand)

Divided sheet forming-case which makes work more easy. It also has the possibility to form larger sheet sizes (partial sheet forming)

Mobile, Compact built, Plug and play ready machine and moderate in total weight

Simple and - Easy to operate - Needs no special skill or knowledge nor strength (ergonomic forms everything within hand reach)

Made of all inert materials Aluminium, Polyethylene, Silicone foam, Teflon, Stainless steel - Spark-proof for use with inflammable solvents

Water reservoir is also scrubber or traptank

Electric and Pneumatic safety devices according safety rules of each country

Low water-, electricity- and air consumption. - Reasonable small internal volumes - Automatic level and drainage control - Low noise level

High quality and production, 8 sheets A4 or one unfolded newspaper every 5 minutes.

Special requests - Custom built to circumstances,

No maintenance only cleaning - Easy to clean - Long service life

 

Above actually LEAFCASTING the more JEZET LEAFCASTERS can be used as LEAF-CAST ACTION = LC and as VACUUM-TABLE ACTION = VT for

DEACIDIFYING                        as LC with the documents completely in and under deacidifying-liquid like Ammonia, Borax, Barium hydroxide, Ether, MMMC

                                                   as VT on the hole document with a spray-gun or just on the spot with a pipette or injector.

WASHING                                 as LC in water with detergent for example Calcium hydroxide or solvent or wash out detergents and/or solvents, Vinegar acid

BLEACHING                             as LC in water with Ammonia, Chloramines T, Chloride of lime, Calcium-metabisulfide /permanganate, Hydrogen peroxide etc.

NEUTRALISING                      as LC in water with Sodium thiosulfate or Hyposulfite to stop further bleaching or neutralization.

LOCAL RINSING                     as VT for local cleaning and rinsing with water, acids, basics, solvents Sodium carbonate, Kerosene

DECOLORIZE                          as VT with Phenyl amine

DISSOLVE                                as VT with Amyl acetate, Ethanol, Methanol, Tetra, Pyridine, Toluene

DEGREASE                              as VT with Acetone, Pyridine, Carbon Tetrachloride

TAPE REMOVAL                      as VT with Acetone, Benzene, Pyridine

DESINFECTING                      as LC in liquid with disinfectants Sodium-tetra borate, Formalin, Phenol, Thymol.

                                                    as VT with liquid- and gas disinfectants; outlet has to be provided with special neutralization device or filter.

SPOT FIBERING                      as VT Pouring on, spot Leaf Casting or filling up holes in parchment or fibrous textiles, like felt.

SIZING                                       as LC glue together with water and fibers Gelatin, Methylcellulose, Collagene

                                                    as VT sizing with spray gun.

VACUUM-TABLE                      for all sorts of restoration work.

 

JEZET LEAFCASTER AVFwSvPeME-0806 MANUAL/ ELECTRICAL VERSION with circulation system SPECIAL BUILD FOR STRONG VACUUM DEVICE for leafcasting, sizing, laminating etc and use as LOW PRESSURE TABLE. Manual operating with electric commands, control units and safety devices. built-up out of a FRAME made of anodised Aluminium profiles on 4 casters with brakes on the front wheels. A rectangular CASTING TANK bisected in a open movable top casting tank-part and a stationary bottom casting tank-part to be opened MANUALLY with help of 2 GAS SPRINGS and closed with quick release clamp coupling. Both provided with a soft silicone packing in the underside and topside of the profiles to form a safe watertight closure. SUPPORT GRID, SUPPORT SCREEN of porous white Polyethylene, CASTING SCREEN made of Polyester, HOLD DOWN GRID made of an aluminium frame, with a stainless steel wire MANUALLY up/down wards operating with help of a balance weight. FIBER TAP electric operating flexible connected to WATERSTORAGE/TRAPTANK made of black Polyethylene. Provided with an electric level control commanding the WATER CIRCULATION PUMP and 1 electric valve for automatically emptying and keeping on level of water storage tank. 3-WAY WATER CIRCULATION for separately filling of first the bottom and second the top casting tank. ELECTRIC SUCTION UNIT Capable to a suction level of -30kPa. SUCTION. CONTROL BOX and PANEL. The FILLING of the water storage tank manually be done.

 

Casting area (8 X A4 or unfolded newspaper)

Area height

Outside measures

Weight

Electricity consumption

Water outlet

Air outlet

Noise level

Colour

PRICE JEZET LEAFCASTER AVFwSvME-0806

850 x 600 mm

800 mm

H x W x D = 1300 x 950 x 800 mm

approximately 60 kg

1.500 Watt maximum 230V – 50hz 1 Phase

Ø 32 mm flexible synthetic hose 3 meters

Ø 75 mm flexible synthetic hose 5 meters

with operating suction device 60 dB. otherwise 45 dB

Silver and Black

€    16.620,00

JEZET LEAFCASTER AVFwSvPeME-0908 MANUAL/ ELECTRICAL VERSION with circulation system SPECIAL BUILD FOR STRONG VACUUM DEVICE for leafcasting, sizing, laminating etc and use as LOW PRESSURE TABLE. Manual operating with electric commands, control units and safety devices. built-up out of a FRAME made of anodised Aluminium profiles on 4 casters with brakes on the front wheels. A rectangular CASTING TANK bisected in a open movable top casting tank-part and a stationary bottom casting tank-part to be opened MANUALLY with help of 2 GAS SPRINGS and closed with quick release clamp coupling. Both provided with a soft silicone packing in the underside and topside of the profiles to form a safe watertight closure. SUPPORT GRID, SUPPORT SCREEN of porous white Polyethylene, CASTING SCREEN made of Polyester, HOLD DOWN GRID made of an aluminium frame, with a stainless steel wire MANUALLY up/down wards operating with help of a balance weight. FIBER TAP electric operating flexible connected to WATERSTORAGE/TRAPTANK made of black Polyethylene. Provided with an electric level control commanding the WATER CIRCULATION PUMP and 1 electric valve for automatically emptying and keeping on level of water storage tank. 3-WAY WATER CIRCULATION for separately filling of first the bottom and second the top casting tank. ELECTRIC SUCTION UNIT Capable to a suction level of -30kPa. SUCTION. CONTROL BOX and PANEL. The FILLING of the water storage tank manually be done.

 

Casting area (12 X A4)

Area height

Outside measures

Weight

Electricity consumption

Water outlet

Air outlet

Noise level

Colour

PRICE JEZET LEAFCASTER AVFwSvME-0908

950 x 850 mm

800 mm

H x W x D = 1300 x 1050 x 1000 mm

approximately 75 kg

1.500 Watt maximum 230V – 50hz 1 Phase

Ø 32 mm flexible synthetic hose 3 meters

Ø 75 mm flexible synthetic hose 5 meters

with operating suction device 60 dB. otherwise 45 dB

Silver and Black

€    19.460,00

 

JEZET LEAFCASTER AVFwSvPePE-0806 PNEUMATIC/ ELECTRICAL VERSION with circulation system SPECIAL BUILD FOR STRONG VACUUM DEVICE for leafcasting, sizing, laminating etc and use as LOW PRESSURE TABLE. pneumatically operating with electric commands, control units and safety devices. built-up out of a FRAME made of anodised Aluminium profiles on 4 casters with brakes on the front wheels. A rectangular CASTING TANK bisected in a open movable top casting tank-part and a stationary bottom casting tank-part to be opened and closed pneumatically. Both provided with a soft silicone packing in the underside and topside of the profiles to form a safe watertight closure. SUPPORT GRID, SUPPORT SCREEN of porous white Polyethylene, CASTING SCREEN made of Polyester, HOLD DOWN GRID made of an aluminium frame, with a stainless steel wire pneumatically up/down wards operating. FIBER TAP pneumatically operating flexible connected to WATERSTORAGE/TRAPTANK made of black Polyethylene. Provided with an electric level control commanding the WATER CIRCULATION PUMP and a pneumatic valve for automatically emptying and keeping on level of water storage tank. 3-WAY WATER CIRCULATION pneumatically operating for separately filling of first the bottom and second the top casting tank. ELECTRIC SUCTION UNIT Capable to a suction level of -30kPa. SUCTION. CONTROL BOX and PANEL. The FILLING of the water storage tank manually be done.

 

Casting area (8 X A4 or unfolded newspaper)

Area height

Outside measures

Weight

Electricity consumption

Compressed Air consumption

Air connection

Water outlet

Air outlet

Noise level

Colour

PRICE JEZET LEAFCASTER AVFwSvPE-0806

850 x 600 mm

800 mm

H x W x D = 1300 x 1050 x 1000 mm

approximately 90 kg

1.500 Watt maximum 230V – 50hz 1 Phase

50 litres p/m maximum 8 Bar flexible

¼" hose with quick release connection

Ø 32 mm flexible synthetic hose 3 meters

Ø 75 mm flexible synthetic hose 5 meters

with operating suction device 60 dB. otherwise 45 dB

Silver and Black

€    23.780,00

JEZET LEAFCASTER MULTIRESTOR® 14-1108E

MULTIFUNCTIONAL RESTORER is capable for the total of 14 different treatments on/of paper and consists of;

LIQUIDS TREATMENT BASIN with upper treatment tank + bottom treatment tank + 2 parts support grid

SUPPORT FRAME - FIBER TAP VK3 - JEZET SUPPLY/TRAP TANK for liquids + WATER CIRCULATION PUMP + 3-WAY WATER CIRCULATION SYSTEM - 3-WAY SUCTION SYSTEM with an ELECTRIC MEDIUM PRESSURE SUCTION UNIT –

JEZET MEDIUM PRESSURE SUCTION TABLE

JEZET MOISTENING UNIT with MOISTENING or CLIMATE DOME (removable) + HYGROSTAT + HUMYDIFYER

JEZET LEAFCASTING UNIT with SUPPORT SCREENS, CASTING SCREENS, HOLD DOWN GRID, LEAF CASTINGSURFACE ELECTRIC CONROLS + CONTROL PANEL ECP.

 

Usable Surface for/as Work; Suction, Leafcasting, Rinsing etc.

Working height

Outside dimensions

Electrical connection

Maximum power consumption

Compressed Air consumption

Air connection

Water connection

Water consumption

Drain

Exhaust connection

Noise level

Total weight

Colour

PRICE JEZET LEAFCASTER MULTIRESTOR® 14-1108E

1100  x  800 mm

900 mm

H x W x D = 1200 x 1220 x 1000 mm

Euro connector with flexible cable of 10 m single phase - neutral and Earth

2,2 k Watt 16 Ampere 230 Volt – 50 Hz

50 litres p/m maximum 10 Bar

flexible ¼" hose with quick release connection

quick release coupling and flexible hose Ø 13 mm of 6 meters

about 150 litres per week

flexible hose of Ø 32 mm 5 meters

flexible hose of Ø 75 mm 10 meters

during suction maximum noise level of 60 dB otherwise 45 dB

approximately 180 kg

Silver and black

€    31.630,00

JEZET PAPER PULP DISINTEGRATORS

 

For disintegration of cellulose pulp, according to the international standard V/4/61 of the union of Cellulose- and Paper chemical Engineers the disintegration process occurs under exactly defined conditions.

 

ADVANTAGES OF THE JEZET PULP-DISINTERGRATORS

Fibres are not warmed up like other type of mostly grinding processes.

Fibres will not been cut (like in a blender) but separated by the shearing effect of this particular process.

Made of all inert materials Aluminium, Polyethylene, Silicone foam, Teflon, Stainless steel

Mobile, Compact built, Plug and play ready machine and moderate in total weight

Simple and - Easy to operate - Needs no special skill or knowledge nor strength (ergonomic forms everything within hand reach)

Electric and Pneumatic safety devices according safety rules of each country

Low noise level

Small or large quantity of pulp 10 up to 580 grams a day.

No maintenance only cleaning - Easy to clean - Long service life

 

NO PHOTO IN CONNECTION WITH COMPETITION

NEW

 

JEZET PAPER PULP DISINTEGRATOR OVE-X (NEW) ELECTRICAL VERSION built up out of a FRAME composed of special FORMED aluminium profiles on four shock absorbing levelling feet, forming a console for the pulp-container and a stanchion for the ELECTRIC MOTOR mounted on a linear bearing formed by a profile. On the motor axis is fixed the hollow IMPELLER-SHAFT made of aluminium. The shaft is provided with a bearing in the aluminium LID with a water-tight protecting against water penetration. The calibrated IMPELLER is fixed on the lower end of the shaft. The linear bearing slides on the stanchion and the build-in ELECTRIC ACTUATOR take care for the stepless and controlled up / down movement of the motor. The console is provided with a levelling control glass, a tilting safety-device and with a hinge on the lower front side for the manual forwards tilting, to empty or to clean the Aluminum PULP-CONTAINER with a capacity of 3 litres. The flense of the container is provided with an O-ring what seals of against the lid. The control box is executed with an ON/OFF LEVER-SWITCH with a safety-device, to make it impossible to start the motor with the drive-unit in any upper position, only than in working position. A ROTARY KNOB for the speed regulation of the Shaft and propeller of 100 to 3000 revolutions. The UP/DOWN LEVER-SWITCH of the movement of the drive-unit with a electrical safety-device, so that it is impossible to move the drive-unit up or down with the pulp-container in any tilted position.

 

Capacity 5 TO 15 % AD FIBERS

Working height

Materials

Outside Dimensions

Electric consumption

Speed regulation of the Shaft and propeller

Weight

Noise level

Colour

PRICE JEZET PAPER PULP DISINTEGRATOR OVE-X

20-110 grams in 3000 ml

table height

Aluminium

320 x 400 x height 700 mm

0,75 kW, 230 Volts, Single phase, 50 Hz

100 to 3000 revolutions per minute

28 kg

less than 40 dB

SILVER ANODISED

€    5.860,00

JEZET PAPER PULP DISINTEGRATOR OVE-01 ELECTRICAL VERSION built up out of a SOLID FRAME composed of rectangular aluminium profiles on four shock absorbing levelling feet, forming a console for the pulp-container and a stanchion for the DRIVE-UNIT mounted on a linear bearing consists of a cylindrical a housing made of aluminium with 2 ball-bearings carrying the hollow PROPELLER-SHAFT made of stainless-steel, with on top a flexible coupling. The lower part of the bearing housing is provided with a water-tight protecting against water penetration. The calibrated PROPELLER is fixed on the lower end. The flexible coupling is attached to an ELECTRIC MOTOR attached on top of the bearing-house. The linear bearing mounted to the stanchion and the build-in ELECTRIC ACTUATOR take care for the stepless and controlled up / down movement of the drive unit. The console is provided with a levelling control glass, a tilting safety-device with a hinge on the lower front side for the manual forwards tilting, to empty or to clean the Stainless Steel PULP-CONTAINER with a capacity of 3 litres. On top of the container an O-ring seals of against the housing. The inside wall is provided of spiral fins.

The stanchion is further executed ON/OFF LEVER-SWITCH with electrical safety-device, it is impossible to start the motor with the drive-unit in any upper position, only than when the propeller is inside the container and in working position.

The UP/DOWN LEVER-SWITCH of the movement of the drive-unit with a electrical safety-device, so that it is impossible to move the drive-unit up or down with the pulp-container in any tilted position.

 

Capacity

Working height

Materials

Outside Dimensions

Electric consumption

Weight

Noise level

Colour

PRICE JEZET PAPER PULP DISINTEGRATOR OVE-01

10-35 grams in 1000 - 3000 ml

table height

Aluminium and Stainless steel

320 x 400 x height 700 mm

0,75 – 1.2 kW, 230 Volts, Single phase, 50 Hz

31 kg

less than 40 dB

SILVER ANODISED

€    7.230,00

JEZET PAPER PULP DISINTEGRATOR OVP-02 PNEUMATIC/ELECTRICAL VERSION built up out of a SOLID FRAME composed of rectangular aluminium profiles on four shock absorbing levelling feet, forming a console for the pulp-container and a stanchion for the DRIVE-UNIT mounted on a linear bearing consists of a cylindrical a housing made of aluminium with 2 ball-bearings carrying the hollow PROPELLER-SHAFT made of stainless-steel, with on top a flexible coupling. The lower part of the bearing housing is provided with a water-tight protecting against water penetration. The calibrated PROPELLER is fixed on the lower end. The flexible coupling is attached to an ELECTRIC MOTOR attached on top of the bearing-house. The linear bearing mounted to the stanchion and the build-in PNEUMATIC PISTON take care for the stepless and controlled up / down movement of the drive unit. The console is provided with a levelling control glass, a tilting safety-device with a hinge on the lower front side for the manual forwards tilting, to empty or to clean the Aluminium PULP-CONTAINER with a capacity of 3 litres. On top of the container an O-ring seals of against the housing. The inside wall is provided of spiral fins.

The stanchion is further executed ON/OFF LEVER-SWITCH with electrical safety-device, it is impossible to start the motor with the drive-unit in any upper position, only than when the propeller is inside the container and in working position.

The UP/DOWN LEVER-SWITCH of the movement of the drive-unit with a pneumatic safety-device, so that it is impossible to move the drive-unit up or down with the pulp-container in any tilted position.

 

Capacity

Working height

Materials

Outside Dimensions

Electric consumption

Compressed air consumption

Weight

Noise level

Colour

PRICE JEZET PAPER PULP DISINTEGRATOR OVP-02

10-35 grams in 1000 - 3000 ml

table height

Aluminium and Stainless steel

320 x 400 x height 700 mm

0,75 – 1.2 kW, 230 Volts, Single phase, 50 Hz

max. 25 litres per min. by 6 Bar./87 psi

45 kg

less than 40 dB

blue powder coated

€    9.660,00

 

NECESSARY VERY SMALL COMPRESSOR FOR THE DISINTEGRATOR WITH A SUPPLY OF COMPRESSED AIR OF ABOUT 1,1 kW 220 V 50 Hz and an OUTPUT OF 100 litres/minute at 9,0 bars MAX.

 

JEZET VANISHED SURFACE CALCULATOR PUCAL-080603 is developed to calculate the vanished parts of authentic documents.

In principle the calculator measures the existing part and two conditions of the document to be leafcasted:

a.) Definition of the estimated size of the original document with an additional 20 mm surrounding margin

b.) Measurement of the thickness of the part of the paper in best condition

c.) Measurement of the surface of the holes in the paper, gaps and the surrounding margin

Together gives a volume of fill, directly translated by a integrated computer into the quantity of grams of dry paper pulp or millilitres of pulp with a fixed mixture of fibres and water. Three possibilities for output are usable: digital reading of grams of paper pulp or a hard copy or a electric pulse to a paper pulp dosing system.

THE CALCULATOR includes: A plateau and a vertical column of rectangles anodized aluminium profiles, together a rigid, light and mobile form. A multi LED lamp 12 W to equal and uniformly lighting. A digital camera is mounted mobile on the column. The camera height corresponds with the measurement surface. The work surface is executed with a spectral green colour (minimize the measurements faults of the different colours of paper and inks). Control cabinet with switches, buttons, meters, regulators, etc.

 

The dimensions of the spectral Green work surface .(Five A4 format simultaneously)

The measurement of the thickness of the document is without contact and effective

Working height

Outside Dimensions

Electric consumption

Compressed air consumption

Weight

Noise level

Colour

 

maximum of 790 x 580 mm

0,0 - 3.0 mm thickness

table height

L 1000 x P 840 x H 1100 mm

0,250 kW, 230 Volts, Single phase, 50 Hz

max. 25 litres per min. by 6 Bar./87 psi

 

less than 40 dB

Silver / Green

Advantages

Without recourse of an external computer to be use by everyone without special knowledge,

Simple and - Easy to operate - Needs no special skill or knowledge nor strength (ergonomic forms everything within hand reach)

Quick, minimum actions, different readings and digital camera.

Mobile, Compact built, Plug and play ready machine and moderate in total weight 15 kg.

Made of all inert materials Aluminium, Polyethylene, Silicone foam, Teflon, Stainless steel

Five A4 format simultaneously or A format A4

Green surface (minimize the faults of measurements of different colours of paper and inks)

Measurement of the thickness without contact.

Lack of weight measurement

Connectable with a pulp dosing system

Special requests - Custom built to circumstances,

No maintenance only cleaning - Easy to clean - Long service life

 

PRICE JEZET VANISHED SURFACE CALCULATOR PUCAL-080603

€          19.000,00

NO PHOTO IN CONNECTION WITH COMPETITION

NEW

 

JEZET PAPER PULP DOSING SYSTEM PUDOS-1060 active dosing system for injection of pulp in a LEAFCASTER

Use integrated with a JEZET Leafcaster or Multirestor or be used separately with other machines. The dosing system is composed of: a support of anodized aluminium profiles on 4 castors with brakes and a place for a disintegrator. A storage tank executed in black polyethylene of 10 litres with concentrated pulp of the disintegrator with an agitator to prevent the separation of the fibres.  A reservoir of white polyethylene of 60 litres and a transparent Polycarbonate front with the preset mixture with the chosen concentration. Coupled with a permanent circulation system, maintaining the mixture constantly on the right concentration between the water and the pulp.

Executed with transparent pipes, circulation pump, valves, maximum and minimum level, security controls and control of concentration.

Linear dosing valve for the injection of the exact amount, a simple adjustment device in the volume of the right amount of pulp. Connection of supply water with valves and meters. Control cabinet with switches, buttons, meters, regulators, etc.

During the injection of the mixture of the pulp, additional water is added to dilute the mixture still more, to get a better casting without lumps of fibre.

 

Working height

Outside Dimensions

Electric consumption

Compressed air consumption

Noise level

Colour

 

table height

L 800 x P 400 x H 1200 mm

0,50 kW, 230 Volts, Single phase, 50 Hz

max. 25 litres per min. by 6 Bar./87 psi

less than 40 dB

Silver / White

 

Advantages

Simple and - Easy to operate - Needs no special skill or knowledge nor strength (ergonomic forms everything within hand reach)

Mobile, Compact built, Plug and play ready machine and moderate in total weight 37 kg.

Made of all inert materials Aluminium, Polyethylene, Polycarbonate, Teflon, Stainless steel

No computer or fragile electronic system

Components transparent (pollution control)

Special requests - Custom built to circumstances,

No maintenance only cleaning - Easy to clean - Long service life

 

PRICE JEZET PAPER PULP DOSING SYSTEM PUDOS-1060

€          13.500,00

JEZET LEAFCASTING APPARATUSES with vacuum table possibilities TYPE AV

 

 

Starting in 1979 and after very thoroughly research, development and tests for several years, JEZET has succeeded to manufacture a "LEAFCASTER", which meets all requirements of the restorers concerning a proper wet leafcasting, more or less as a mass-restoration. A mass-restoration which becomes more and more urgent by the increasing degree of decay by means of moisture, mildew, floods, acidification, aging and especially nowadays the wear and tear by use and air-pollution.

 

A restoration by leafcasting according to the old reliable professional skill, but using the latest techniques.

 

 

 

From a simple manually operated LEAFCASTER to multifunctional electric/pneumatic controlled machines.