Jezet

home

 

contact

 

home english

 JEZET Restoration Machines bv
 Beatrixlaan 5
 4645 HD  PUTTE
 The Netherlands

 T  +31(0)164606493
 F  +31(0)164606495

 E  info@jezet-restoration-machines.com

 W www.jezet-restoration-machines.com

The JEZET MULTIRESTOR® MULTIFUNCTIONAL RESTORATION SYSTEMS for ALL TREATMENTS OF PAPER is based on the synthesis of several different restoration machines with the JEZET technology and can be built-up out of the following 10 machines and functions:

 

WORK TABLE function for use as a worktop with a hard cover plate of Trespa, movable on 4 casters

LIGHT TABLE function with a illuminated surface of porous polyethylene

DRY CLEANING TABLE function with or without suction on a support grid as for use as dry cleaning, brushing, air-gun blowing, etc.

WET CLEANING TABLE function with or without suction on a support grid and so used with or without liquid for cleaning with water, solvents, deacidification or disinfection liquids, by means of spraying, brushing etc.and use of the SCRUBBER/TRAPTANK with suction drying.

LOW PRESSURE SUCTION TABLE function with ELECTRIC SUCTION on the stainless steel FLAT SIEVE or covered with the HPE plate. Mostly low suction force for hold down and high airflow for flat supported treatments with or without liquid to do for example cleaning; sizing, bleaching; rinsing; fixing bath; discoloring, degreasing deacidification; disinfection, etc.

MEDIUM PRESSURE SUCTION TABLE function with ELECTRIC SUCTION on the stainless steel FLAT SIEVE or covered with the HPE plate. middle suction force and high airflow. Combined surface suction for flattening and spraying of maps, vellum flattening, supplying treatments, doubling, lining, cloth or linen strengthening, strengthening with Japanese paper, sizing etc.

HIGH PRESSURE VACUUM TABLE function with PNEUMATIC VACUUM on the stainless steel FLAT SIEVE or covered with the HPE plate. Small surface suction for spot treatments real vacuum and low airflow for treatments as Stain removal; Tape removal, Glue removal; Bleaching; Aquarelle or Watercolor repair; Point leafcasting etc.

LIQUIDS TREATMENT BASIN function with CIRCULATION SYSTEM as an OPEN BASIN for treatment in liquids with or without circulation for example deacidification; washing; bleaching; rinsing; watering; fixing bath; discoloring, degreasing; dissolving; disinfecting etc. and use of the SCRUBBER/TRAPTANK/STORAGE RESERVOIR

LARGE and DIVIDED SURFACE LEAFCASTER function with HIGH VACUUM WATER DRAINAGE and CIRCULATION SYSTEM JEZET LEAF CASTING SYSTEM for both wet (in water) and dry (with water) leaf casting; large surface; divided surface; spot leafcasting; strengthening, sizing etc. and use of the SCRUBBER/TRAPTANK/STORAGE RESERVOIR

HUMIDIFICATION or CLIMATE CHAMBER function with HYGROSTAT CONTROL execution as CLIMAT CHAMBER with the removable TRASPARENT DOME and can be used with or without liquid; vapor; heated or cold steam for moistening, drying; deacidification; disinfecting, cleaning etc.

SPAY or SUCTIONWALL function with ELECTRIC SUCTION as SUCTION TABLE or SUCTION WALL with the AIRPRESSURE STATION for spraying of liquids for deacidification; disinfecting; de-sizing; sizing; glue coating; painting etc.

 

 

SPECIFIC ADVANTAGES OF THE JEZET MULTIRESTOR® RESTORATION SYSTEMS

Custom built to circumstances, adaptable on size and dimensions, on treatments or on special demands of the restorer from single system to multi system set up

More treatments on one machine (up to 26 treatments) - Dismountable built or as one plug and play ready machine - Compact built therefore less floor space - Movable on wheels with brakes

Half the price of several separate machines together

Simple and Easy to operate (ergonomic forms everything within hand reach) Simple to learn and needs no special skill or knowledge nor strength

Made of all inert materials Aluminium, Polyethylene, Silicone foam, Teflon, Stainless steel - Spark-proof for use with inflammable solvents - Pure solvents and treatment liquids resisted

Large useable surface and also divisible work areas - Divided upper reservoir - Water reservoir is also scrubber or traptank

Several different adjustable vacuum / suction propulsion and generating systems like electric, pneumatic and waterpower.

Electric and Pneumatic safety devices according safety rules of each country - Choice switch with automatic setting control

Low water-, electricity- and air consumption. (in comparison with several separate machines) - Reasonable small internal volumes - Automatic level and drainage control - Low noise level

Direct adaptable to existing exhaust systems - Additional connections to adapt existing components - Special requests

Moderate in total weight (in comparison with several separate machines)

No maintenance only cleaning - Easy to clean - Long service life

 

 

JEZET MULTIRESTOR® 26-1510 multifunctional restorer is capable for the total of 26 different treatments on/of paper and consists of;

LIQUIDS TREATMENT BASIN with upper treatment tank + bottom treatment tank + 2 parts support grid

SUPPORT FRAME Outside dimensions are 1580x1080mm.

FIBER TAP VK3

JEZET SUPPLY/TRAP TANK for liquids + WATER CIRCULATION PUMP + 3-WAY WATER CIRCULATION SYSTEM

3-WAY VACUUM SYSTEM with FINEFILTER + PNEUMATIC VACUUM PUMP + ELECTRIC MEDIUM PRESSURE SUCTION UNIT

JEZET VACUUM TABLE

JEZET MOISTENING UNIT with MOISTENING or CLIMATE DOME (removable) + HYGROSTAT + HUMYDIFYER

JEZET LEAFCASTING UNIT with SUPPORT SCREENS, CASTING SCREENS, HOLD DOWN GRID, LEAF CASTINGSURFACE

ELECTRIC/PNEUMATIC CONROLS + CONTROL PANEL EPCP

 

Usable Surface for/as Work; Suction, Vacuum, Leafcasting, Rinsing etc.

Working height

Outside dimensions

Electrical connection

Maximum power consumption

Pneumatic connection

Pneumatic consumption

Water connection

Water consumption

Drain

Exhaust connection

Noise level

Total weight

Colour

 

1500  x  950 mm

900 mm

H x W x D = 1600 x 1660 x 1300 mm

Euro connector with flexible cable of 10 m single phase - neutral and Earth

2,2 k Watt 16 Ampere 230 Volt – 50 Hz

quick release coupling and flexible hose of Ø 9 mm of 6 metres

350 litres per minute max at 10 Bar

quick release coupling and flexible hose Ø 13 mm of 6 meters

about 300 litres per week

flexible hose of Ø 32 mm 5 meters

flexible hose of Ø 75 mm 10 meters

during suction maximum noise level of 60 dB otherwise 45 dB

approximately 300 kg

Silver and black

 

 

JEZET VACUUM TABLE VTUHTW-131008EPP adjustable in Height and Angle + HUMIDIFICATION unit

 

VACUUM TABLE-TOP is constructed of aluminum profiles and POLYETHELENE WORKSURFACE (exchangeable with a Stainless steel perforated work surface) and mounted on the TOP SUPPORT FRAME by means of 4 hinges at the front and an electric actuator permitting the vacuum table top a step less tilting between 0º to 45º The top frame is mounted on a single aluminum lifting-column with a step less height adjustment of the working surface between 800 to 1100 mm from the ground.

The column is fixed on the BASE FRAME mobile on 4 casters with brakes. On the base frame are also fixed the MOISTURE OR LIQUID TRAPTANK (far better and less dangerous than an activated carbon filter, The 3 WAY CONNECTION SYSTEM 3WC The ELECTRIC MEDIUM PRESSURE SUCTION UNIT  Capable to a suction level of -40kPa on a big surface. The PNEUMATIC VACUUM UNIT Capable to a suction level of - 80kPa , The ULTRASONIC HUMIDIFER.

CONTROLEPANEL CPE is built on the front of the table top and executed as a TURNABLE U-formed profile box with 24 Volts safety current and the necessary equipment

The higher HUMIDIFICATION DOME is made of aluminum profiles and transparent POLYCARBONATE and mounted on to the table top by means of 2 hinges and also provided with a HYGROSTAT mounted in the dome of the Vacuum table to control the ULTRASONIC HUMIDIFER. Furthermore executed with a LOW PRESSURE SPRAY GUN with flexible hose and quick release coupling

 

Working; suction; area

Area height and tilting

Outside measures

Weight

Electricity consumption maximum

Water consumption (depending on the treatments) maximum

Exhaust air outlet

Noise level maximum

Colour

Weight

1300 x 1000 mm

800 to 1100 mm. and 0 to 45º

W x D x H =1380 x 900 x 1500 mm

approximately 150 kg

2,2 k Watt 240V – 50hz 1 Phase

50 litres a week

Ø 75 mm flexible synthetic hose 5 meters

with operating suction device 60 dB otherwise 45 dB

Silver and Black

175 KG

 

JEZET ILLUMINATED SUCTION TABLE VLTT-1007EP Built up out of the following components:

The LIGHT SUCTION TABLE is composed in two compartments: 1 for vacuum and 1 for light. The vacuum compartment made of transparent polycarbonate and a rigid support platform The working surface is made of hard wearing, easy to clean non corrosive, WHITE POLYETHELENE. The light compartment is made of an Aluminum base plate and MULTY LEDS of Intensity of the COLD light 5.000 Lux. Day-light color. The size of the useful working surface of the table-top W x D 1.000 X 700 mm. The SUPPORT FRAME is constructed of a base frame provided with four casters with brakes. On the base frame is mounted a top frame to support the LIGHT SUCTION TABLE Further on the base frame the ELECTRIC SUCTION DEVICE, TRAPTANK, CONTROLEPANEL, CONTROLEBOX and connections.

 

Usable Surface for/as Illumination, Work; Suction, etc.

Working height

Outside dimensions

Electrical connection

Maximum power consumption

Exhaust connection

Noise level

Total weight

Colour

1000  x 700  mm

800 mm

W x D = 1000 x 700 mm

Euro connector with flexible cable of 10 m single phase - neutral and Earth

2,2 k Watt 16 Ampere 230 Volt – 50 Hz

flexible hose of Ø 75 mm 10 meters

during suction maximum noise level of 60 dB otherwise 45 dB

approximately 80 kg

Silver and black

JEZET MULTIRESTOR® 14-1108E MULTIFUNCTIONAL RESTORER is capable for the total of 14 different treatments on/of paper and consists of;

LIQUIDS TREATMENT BASIN with upper treatment tank + bottom treatment tank + 2 parts support grid

SUPPORT FRAME - FIBER TAP VK3 - JEZET SUPPLY/TRAP TANK for liquids + WATER CIRCULATION PUMP + 3-WAY WATER CIRCULATION SYSTEM - 3-WAY SUCTION SYSTEM with an ELECTRIC MEDIUM PRESSURE SUCTION UNIT - JEZET MEDIUM PRESSURE SUCTION TABLE

JEZET MOISTENING UNIT with MOISTENING or CLIMATE DOME (removable) + HYGROSTAT + HUMYDIFYER

JEZET LEAFCASTING UNIT with SUPPORT SCREENS, CASTING SCREENS, HOLD DOWN GRID, LEAF CASTINGSURFACE

ELECTRIC CONROLS + CONTROL PANEL ECP

 

Usable Surface for/as Work; Suction, Leafcasting, Rinsing etc.

Working height

Outside dimensions

Electrical connection

Maximum power consumption

Water connection

Water consumption

Drain

Exhaust connection

Noise level

Total weight

Colour

1100  x  800 mm

900 mm

H x W x D  = 1600 x 1220 x 1000 mm

Euro connector with flexible cable of 10 m single phase - neutral and Earth

2,2 k Watt 16 Ampere 230 Volt – 50 Hz

quick release coupling and flexible hose Ø 13 mm of 6 meters

about 150 litres per week

flexible hose of Ø 32 mm 5 meters

flexible hose of Ø 75 mm 10 meters

during suction maximum noise level of 60 dB otherwise 45 dB

approximately 180 kg

Silver and black

 

JEZET LIGHT TABLE with a built-in PNEUMATIC PRESS LTTrW151009-PPU15

 

is constructed of rectangular anodized ALUMINIUM PROFILES and forms a RIGID FRAME on 4 turning wheels with brakes. Top work side is paneled with a sheet of laminated tempered Opal glass, The light compartment is made of a top diffuser, a Trespa base plate with high power MULTY LEDS. Intensity of the COLD light 5.000 Lux. Day-light colour. The rear and sides closed by transparent polycarbonate plates. The pneumatic operated safety screen made of transparent polycarbonate plate closes the front first, to be able to operate the press

 

Useful illuminated glass surface

Press surfaces panelled waterproof laminated plywood

Double acting AIRCYLINDER with a STROKE

Two-hands safety control-handling for adjustable PRESSURE FORCE

Table height / Working height

Electrical connection

Maximum power consumption

Air consumption

Weight

1500 x 1000 mm

1470 x  920 mm

UPWARDS of 150 mm

0 kg up till maximum 3000 kg

950 mm / 620-770 mm

Euro connector with flexible cable of 10 m single phase - neutral and Earth

0,5 k Watt 16 Ampere 230 Volt – 50 Hz

200 Liters/min 10 bar

190 kg

 

 

JEZET MULTIRESTOR® 06-0808E MULTIFUNCTIONAL RESTORER is capable for the total of 6 different treatments on/of paper and consists of;

LIQUIDS TREATMENT BASIN with upper treatment tank + bottom treatment tank + 1 support grid - SUPPORT FRAME - FIBER TAP - JEZET SUPPLY/TRAP TANK for liquids + WATER CIRCULATION PUMP + 1-WAY WATER CIRCULATION SYSTEM - 2-WAY SUCTION SYSTEM with an ELECTRIC MEDIUM PRESSURE SUCTION UNIT - JEZET MEDIUM PRESSURE SUCTION TABLE - JEZET MOISTENING UNIT with MOISTENING or CLIMATE DOME (removable) + HYGROSTAT + HUMYDIFYER - JEZET LEAFCASTING UNIT with SUPPORT SCREENS, CASTING SCREENS, HOLD DOWN GRID, LEAF CASTINGSURFACE - ELECTRIC CONROLS + CONTROL PANEL ECP

 

Usable Surface for/as Work; Suction, Leafcasting, Rinsing etc.

Working height

Outside dimensions

Electrical connection

Maximum power consumption

Water consumption

Drain / Exhaust connection

Noise level

Total weight

Colour

800  x  800 mm

900 mm

H x W x D = 1400 x 880 x 1000 mm

Euro connector with flexible cable of 10 m single phase - neutral and Earth

1,5 k Watt 16 Ampere 230 Volt – 50 Hz

about 90 litres per week

flexible hose of Ø 32 mm 5 meters / flexible hose of Ø 75 mm 10 meters

during suction maximum noise level of 60 dB otherwise 45 dB

approximately 95 kg

Silver and black

JEZET ILLUMINATED SUCTION TABLE and WALL VLTT-1410EPP Built up out of the following components:

The LIGHT SUCTION TABLE/WALL is composed in two compartments: 1 for vacuum and 1 for light. The vacuum compartment made of transparent polycarbonate and a rigid support platform The working surface is made of hard wearing, easy to clean non corrosive, WHITE POLYETHELENE. The light compartment is made of an Aluminum base plate and MULTY LEDS of Intensity of the COLD light 5.000 Lux. Day-light color. The size of the useful working surface of the table-top W x D 1.500 X 1.200 mm. The SUPPORT FRAME is constructed of a base frame provided with four casters with brakes. Mounted on the frame 2 linear actuators for stepless movement from up to 1150 and down to 750 mm. On the actuators is mounted a top frame to support the LIGHT VACUUM TABLE/SUCTION WALL and enables it to tilt from HORIZONTAL to VERTICAL by means of 4 hinges on the front and a linear actuator. Further on the base frame the ELECTRIC SUCTION DEVICE, PNEUMATIC VACUUM DEVICE, TRAPTANK, CONTROLEPANEL, CONTROLEBOX and connections.

 

Usable Surface for/as Illumination, Work; Suction, Vacuum, etc.

Working height variable

Outside dimensions

Electrical connection

Maximum power consumption

Pneumatic connection

Pneumatic consumption

Exhaust connection

Noise level

Total weight

Colour

1400  x 1000  mm

750 to 1100 mm

W x D = 1500 x 1200 mm

Euro connector with flexible cable of 10 m single phase - neutral and Earth

2,2 k Watt 16 Ampere 230 Volt – 50 Hz

quick release coupling and flexible hose of Ø 9 mm of 6 metres

350 litres per minute max at 10 Bar

flexible hose of Ø 75 mm 10 meters

during suction maximum noise level of 60 dB otherwise 45 dB

approximately 150 kg

Silver and black

JEZET TRIPLE-FILTER DUSTCLEANINGSYSTEM DEPM-2211 + VTWHe1207021A consists of TWO separate UNITS

 

1) SUCTION TABLE/WALL is composed out of aluminum profiles forming a very light and rigid frame electric stepless adjustable in height 500 mm movable on 4 casters with brakes, on the frame is mounted

1 SWING-ARM made of aluminum profile, light and rigid and flexible polyethylene special suction tube. Circling 150° angle, easy exchangeable tube-connector to fit six different tubular cleaning brushes.

1 SUCTION TABLE/WALL is executed in a table and wall section both made off aluminum profiles with a fixed-in aluminum base-plate and a perforated working surface made of hard wearing, easy to clean non corrosive, stainless steel. Connected to the suction point by means of LARGE DIAMETER flexible HOSE of polyethylene. TABLE SUCTION SURFACE is W x L = 1200 x 700 mm. The WALL SUCTON SURFACE is W x L = 1200 x 700 mm.

 

2) SUCTION-FILTER UNIT and placed in another room is composed out of aluminum profiles forming a very light and rigid frame movable on 4 casters with brakes, on the frame is mounted the suction device and the three stage filtering suction device composed out of:

CYCLONE made of hard polyethylene, for filtering of the bigger and even very fine pieces

PRE-FILTER 99,95 % built-in the cyclone and easy to be cleaned, by means of a shot of compressed air

MICRO-FILTER 99,997 % at DOP test 0,3 ì (mu)

SUCTION DEVICE with a brushless 3-phase electric motor, capable of a suction force of 30 %.

SINGLE PHASE NETCONNECTION of 230 V- 50 Hz.

 

JEZET VACUUMTABLE with HUMIDIFICATION UNIT + SEPARATE LIGHT SUCTION TABLE consists of the follow components :

The VACUUM TABLE-TOP out of profiles with a base-plate and a rigid support grid all of Aluminum and a perforated working surface made stainless steel SUPPORT FRAME on 4 casters with brakes, MOISTURE OR LIQUID TRAPTANK, SPRAY GUN, ELECTRIC VACUUM UNIT, HUMIDIFICATION DOME, HYGROSTAT, HUMIDIFICATION UNIT.

The LIGHT/SUCTION TABLE-TOP is executed of a suction compartment with working surface made of WHITE POLYETHELENE and a light compartment with MULTY power LEDS of the COLD light 5.000 Lux. Day-light colour. On-off switch and DIMM switch

 

Usable Surface Vacuumtable /Illuminated Suction

Working height

Outside dimensions

Electrical connection

Maximum power consumption

Exhaust connection

Noise level

Total weight

Colour

1300 x 800 mm / 800 x 600 mm

800 mm

W x D = 1900 x 800 mm

Euro connector with flexible cable of 10 m single phase - neutral and Earth

2,2 k Watt 16 Ampere 230 Volt – 50 Hz

flexible hose of Ø 75 mm 10 meters

during suction maximum noise level of 60 dB otherwise 45 dB

approximately 80 kg

Silver and black