Jezet

home

 

contact

 

homefrancais

 JEZET Restoration Machines bv
 Beatrixlaan 5
 4645 HD  PUTTE
 The Netherlands

 T  +31(0)164606493
 F  +31(0)164606495

 E  info@jezet-restoration-machines.com

 W www.jezet-restoration-machines.com

The JEZET VACUUM TABLE-TOP VTT-1909St is constructed of anodized softline profiles JZ800 with a inserted shaped base-plate, a rigid heavy duty support grid all made of aluminum to restrain even a higher vacuum (maximum of  -90 kPa abs. = 125 mBar. = 27 inch Hg) and a perforated working surface made of hard wearing, easy to clean non corrosive, stainless steel permitting a maximum mesh of 35% per square meter. The table top rear side is provided with an aluminum suction pipe to be connected with a suction or vacuum unit.

The size of the useful working surface is W x D 1950 X 950 mm. outside dimensions 2000 x 1000 mm. height 80 mm.

PRICE JEZET TABLE-TOP VTT-1909St                                                                                                                                                                                                           €    1.993,00

 

The JEZET VACUUM TABLE-TOP VTT-1809St + SPP is constructed of anodized softline profiles JZ800 with a inserted shaped base-plate, a rigid heavy duty support grid all made of aluminum to restrain even a higher vacuum (maximum of  -90 kPa abs. = 125 mBar. = 27 inch Hg) and a perforated working surface made of hard wearing, easy to clean non corrosive, stainless steel permitting a maximum mesh of 35% per square meter.

The table top is inserted in to an existing cabinet and the bottom is provided with an aluminum suction pipe, connected with the inlet of the separate TRAPTANK and on the outlet directly fitted the adjustable PNEUMATIC VACUUM UNIT. The size of the useful working surface is W x D = 1800 X 900 mm.

PRICE JEZET TABLE-TOP VTT-1809St + SPP                                                                                                                                                                                              €    2.620,00

 

The JEZET VACUUM TABLE-TOP VTT-1210St + SEZ is constructed of anodized softline profiles JZ800 with a inserted shaped base-plate, a rigid heavy duty support grid all made of aluminum to restrain even a higher vacuum (maximum of  -90 kPa abs. = 125 mBar. = 27 inch Hg) and a perforated working surface made of hard wearing, easy to clean non corrosive, stainless steel permitting a maximum mesh of 35% per square meter. The table top rear side is provided with a triple polyethylene suction pipe connected with the inlet of the separate TRAPTANK and the outlet by means of a flexible hose with an INDUSTRIAL VACUUM CLEANER.

The size of the useful working surface is W x D 1200 X 1000 mm. outside dimensions 1240 x 1040 mm. height 80 mm.

PRICE JEZET TABLE-TOP VTT-1210St + SEZ                                                                                                                                                                                               €    2.270,00

 

JEZET VACUUM TABLE SYSTEM VTTFwSPP-0906St (simple execution without compressor) built-up of the following components: a SUPPORT FRAME on 4 castors with brakes with on top a VACUUM TABLE-TOP provided with a perforated working surface of stainless steel. The table top SUCTION PIPE is connected with the inlet of the TRAPTANK and the outlet by means of a flexible hose to the adjustable PNEUMATIC VACUUM UNIT. Both fixed on the base of the support frame. A quick release coupling connection for a spray gun.

 

Working; suction; area

Area height

Outside measures

Compressed air consumption maximum

Exhaust air outlet

Noise level maximum

Colour

Weight

PRICE JEZET VACUUM TABLE SYSTEM VTTFwSPP-0906St without compressor

PRICE JEZET VACUUM TABLE SYSTEM VTTFwSPP-0906St with separate compressor 1,5 kW

950  x  600 mm

800 mm

W x D =1000 x 640 mm

150 litres per minute at 6 Bar

Ø 75 mm flexible synthetic hose 5 meters

with operating vacuum device 55 dB. Otherwise 45 dB

Silver and Black

approximately 43 kg

€    9.530,00

€  10.680,00

JEZET VACUUM TABLE SYSTEM VTTFwSPPHy-1308St built-up of the following components: a SUPPORT FRAME on 4 castors with brakes with on top a VACUUM TABLE-TOP provided with a perforated working surface of stainless steel. The table top SUCTION PIPE is connected with the inlet of the TRAPTANK and the outlet by means of a flexible hose to the adjustable PNEUMATIC VACUUM UNIT. Both and the Hydrovane COMPRESSOR for the air supply, fixed on the support frame base. A quick release coupling connection for a spray gun.

 

Usable Surface Vacuumtable

Working height

Outside measures

Electrical connection

Maximum power consumption of the Compressor

Exhaust connection

Noise level with compressor running

Total weight

Colour

PRICE JEZET VACUUM TABLE SYSTEM VTTFwSPPHy-1308St with Hydrovane COMPRESSOR

 

 

1300 x 800 mm

800 mm

W x D = 1340x 840 mm

Euro connector with flexible cable of 10 m single phase - neutral and Earth

1,5 k Watt 16 Ampere 230 Volt – 50 Hz

flexible hose of Ø 75 mm 5 meters

maximum of 67 dB otherwise 45 dB

approximately 80 kg

Silver and black

€    14.690,00

 

JEZET SUCTION TABLE VTT2FwPh45º-1809St pneumatic stepless adjustable in angle to 45º built-up of the following components: 2 SUPPORT FRAMES of aluminum profile plus plating of Trespa on 4 castors with FRONT BRAKES with on top a VACUUM TABLE-TOP of anodized softline profiles JZ800 with a inserted shaped base-plate, a rigid heavy duty support grid all made of aluminum to restrain even a higher vacuum (maximum of  -90 kPa abs. = 125 mBar. = 27 inch Hg) and a perforated working surface made of hard wearing, easy to clean non corrosive, stainless steel permitting a maximum mesh of 35% per square meter. The table top is pneumatically stepless adjustable in angle to 45º vertical.

The table top bottom is provided with an aluminum suction pipe to be connected by means of a flexible hose to with a suction or vacuum unit.

 

 

Usable Surface Vacuumtable

Working height

Outside dimensions

Suction connection

Total weight

Colour

PRICE JEZET VACUUM TABLE SYSTEM VTT2FwPh45-1809St pneumatic stepless adjustable in angle to 45º without compressor

W x L = 1800 x 950 mm

800 mm

W x D = 1840x 1000 mm

flexible hose of Ø 75 mm 5 meters

approximately 67 kg

Silver and black

€    4.220,00

 

 

JEZET SUCTION TABLE VTTFwSPPMh45º-1409St manually stepless adjustable in angle to 45º built-up of the following components: SUPPORT FRAME of aluminum profile plus plating on 4 castors with brakes with on top a VACUUM TABLE-TOP of anodized softline profiles JZ800 with a inserted shaped base-plate, a rigid heavy duty support grid all made of aluminum to restrain even a higher vacuum (maximum of  -90 kPa abs. = 125 mBar. = 27 inch Hg) and a perforated working surface made of hard wearing, easy to clean non corrosive, stainless steel permitting a maximum mesh of 35% per square meter. The table top is manually stepless adjustable in angle to 45º vertical.

The table top SUCTION PIPE is connected with the inlet of the TRAPTANK and the outlet by means of a flexible hose to the adjustable PNEUMATIC VACUUM UNIT. Both fixed on the base of the support frame. A quick release coupling connection for a spray gun.

 

Usable Surface Vacuumtable

Working height

Outside dimensions

Compressed air consumption maximum

Exhaust air outlet

Noise level maximum

Colour

Weight

PRICE JEZET VACUUM TABLE SYSTEM VTTFwSPPMh45-1409St manually adjustable in angle to 45º without compressor

PRICE JEZET VACUUM TABLE SYSTEM VTTFwSPPMh45-1409St manually adjustable to 45º with separate compressor 2,2 kW

W x L = 1470 x 970 mm

800 mm

W x D = 1600x 1000 mm

350 litres per minute at 6 Bar

Ø 75 mm flexible synthetic hose 5 meters

with operating vacuum device 55 dB. Otherwise 45 dB

Silver and Black

approximately 80 kg

€    12.760,00

€   14.210,00

 

JEZET VACUUM TABLE SYSTEM VTTFwSEP-1308St built-up of the following components: a SUPPORT FRAME on 4 castors with brakes with on top a VACUUM TABLE-TOP provided with a perforated working surface of stainless steel. The table top SUCTION PIPE is connected with the inlet of the TRAPTANK and the outlet by means of a flexible hose to the adjustable ELECTRIC SUCTION UNIT. Both fixed on the support frame base.

 

Usable Surface Vacuumtable

Working height

Outside dimensions

Electrical connection

Maximum power consumption

Compressed air consumption maximum

Exhaust connection

Noise level with compressor running

Weight

Colour

PRICE JEZET VACUUM TABLE SYSTEM VTTFwSEP-1308St with electric suction unit(PLUG AND PLAY)

 

1300 x 800 mm

800 mm

W x D = 1340x 840 mm

Euro connector with flexible cable of 10 m single phase - neutral and Earth

2,2 k Watt 16 Ampere 230 Volt – 50 Hz

50 litres per minute at 6 Bar

flexible hose of Ø 75 mm 5 meters

maximum of 62 dB otherwise 45 dB

approximately 75 kg

Silver and black

€    11.470,00

 

 

JEZET WORK SUCTION TABLE FOR PROCESSING OF SOLVENTS VTTFwSs-0505St consisting of: a TABLETOP of a porous work surface of STAINLESS STEEL on a SUPPORT FRAME of Aluminum profiles on 4 castors of which the front have brakes. On the bottom-mounted base plate is mounted a SPECIAL LARGE TRAPTANK to be connected with a flexible hose to any new or existing suction device.

With optic level control, water supply connection with valve and drain tap.

 

Usable Surface Suctiontable

Exhaust connection

Total weight

Colour

PRICE JEZET WORK SUCTION TABLE FOR PROCESSING OF SOLVENTS VTTFwSs-0505St

B x D = 500 x 500 mm

flexible hose of Ø 75 mm 5 meters

approximately 45 kg

Silver and black

€    3.945,00

 

JEZET VACUUM TABLE SYSTEM VTTFwHdPSPPHy-1208St built-up of the following components: a SUPPORT FRAME on 4 castors with brakes with on top a VACUUM TABLE-TOP provided with a perforated working surface of stainless steel. The table top SUCTION PIPE is connected with the inlet of the TRAPTANK and the outlet by means of a flexible hose to the adjustable PNEUMATIC VACUUM UNIT. Both and the Hydrovane COMPRESSOR for the air supply, fixed on the support frame base. A quick release coupling connection for a spray gun. Further provided with a HUMIDIFICATION DOME plus connections with a pneumatically up and down operation.

 

 

Usable Surface Vacuumtable

Working height

Outside dimensions

Electrical connection

Maximum power consumption of the Compressor

Exhaust connection

Noise level with compressor running

Total weight

Colour

PRICE JEZET VACUUM TABLE SYSTEM VTTFwSPPHy-1208St with DOME and Hydrovane COMPRESSOR(PLUG AND PLAY)  

 

1200 x 800 mm

800 mm

W x D = 1240x 840 mm

Euro connector with flexible cable of 10 m single phase - neutral and Earth

1,5 k Watt 16 Ampere 230 Volt – 50 Hz

flexible hose of Ø 75 mm 5 meters

maximum of 62 dB otherwise 45 dB

approximately 90 kg

Silver and black

€    16.980,00

 

 

JEZET VACUUM TABLE SYSTEM VTTFwHdPSPPP-1308St built-up of the following components: a SUPPORT FRAME on 4 castors with brakes with on top a VACUUM TABLE-TOP provided with a perforated working surface of stainless steel. The table top SUCTION PIPE is connected with the inlet of the TRAPTANK and the outlet by means of a flexible hose to the adjustable PNEUMATIC VACUUM UNIT. Both and the Hydrovane COMPRESSOR for the air supply, fixed on the support frame base. A quick release coupling connection for a spray gun. Further provided with a HUMIDIFICATION DOME plus connections with a pneumatically up and down operation.

Usable Surface Vacuumtable

Working height

Outside dimensions

Electrical connection

Maximum power consumption

Compressed air consumption maximum

Exhaust connection

Noise level with compressor running

Total weight

Colour

PRICE JEZET VACUUM TABLE SYSTEM VTTFwSPPP-1308St with ELECTRIC / PNEUMATIC VACUUM without compressor

PRICE JEZET VACUUM TABLE SYSTEM VTTFwSPPP-1308St with ELECTRIC / PNEUMATIC VACUUM with separate compressor

1300 x 800 mm

800 mm

W x D = 1340x 840 mm

Euro connector with flexible cable of 10 m single phase - neutral and Earth

2,2 k Watt 16 Ampere 230 Volt – 50 Hz

350 litres per minute at 6 Bar

flexible hose of Ø 75 mm 5 meters

maximum of 62 dB otherwise 45 dB

approximately 90 kg

Silver and black

€    18.530,00

€    19.840,00

 

Picture available in January 2012

JEZET VACUUM TABLE SYSTEM VTTFwHdPSPPHy-1308St built-up of the following components: a SUPPORT FRAME on 4 castors with brakes with on top a VACUUM TABLE-TOP provided with a perforated working surface of stainless steel. The table top SUCTION PIPE is connected with the inlet of the TRAPTANK and the outlet by means of a flexible hose to a triple station one to the adjustable ELECTRIC SUCTION and the other to the adjustable  PNEUMATIC VACUUM UNIT. Both and the Hydrovane COMPRESSOR for the air supply, fixed on the support frame base. Further provided with a HUMIDIFICATION DOME plus connections with a pneumatically up and down operation and an ULTRASONIC HUMIDIFYER and a separate BOOKWEDGE.  A quick release coupling connection for a spray gun.

Usable Surface Vacuumtable

Working height

Outside dimensions

Electrical connection

Maximum power consumption of the Compressor

Exhaust connection

Noise level with compressor running

Total weight

Colour

PRICE JEZET VACUUM TABLE SYSTEM VTTFwSPPHy-1308St with DOME and compressor (PLUG AND PLAY)

 

1300 x 800 mm

800 mm

W x D = 1340x 840 mm

Euro connector with flexible cable of 10 m single phase - neutral and Earth

1,5 k Watt 16 Ampere 230 Volt – 50 Hz

flexible hose of Ø 75 mm 5 meters

maximum of 62 dB otherwise 45 dB

approximately 95 kg

Silver and black

€    19.475,00

 

 

JEZET VACUUM TABLE SYSTEM VTTFwHdPSPP-1308St with 2 extra tiltable WORKTABLES built-up of the following components: a SUPPORT FRAME on 4 castors with brakes with on top a VACUUM TABLE-TOP provided with a perforated working surface of stainless steel. The table top SUCTION PIPE is connected with the inlet of the TRAPTANK and the outlet by means of a flexible hose to the adjustable PNEUMATIC VACUUM UNIT. Both fixed on the support frame base. Further provided with a HUMIDIFICATION DOME plus connections with a pneumatically up and down operation and an ULTRASONIC HUMIDIFYER commanded by a HYGROSTAT and on the sides 2 extra tiltable WORKTABLES.

Usable Surface Vacuumtable / with tables

Working height

Outside dimensions

Electrical connection

Maximum power consumption

Compressed air consumption maximum

Exhaust connection

Noise level with compressor running

Total weight

Colour

PRICE JEZET VACUUM TABLE SYSTEM VTTFwHdPSPP-1308St with DOME and TABLES without compressor

1300 x 800 mm / 2700 x 800 mm

800 mm

W x D = 2740x 840 mm

Euro connector with flexible cable of 10 m single phase - neutral and Earth

0,85 k Watt 16 Ampere 230 Volt – 50 Hz

350 litres per minute at 6 Bar

flexible hose of Ø 75 mm 5 meters

maximum of 62 dB otherwise 45 dB

approximately 65 kg

Silver and black

€    16.620,00

 

JEZET VACUUMTABLE VTTFwHdPSPP -1308St+ SEPARATE LIGHT TABLE LTT-0806 built-up of the following components: a SUPPORT FRAME on 4 castors with brakes with on top a VACUUM TABLE-TOP provided with a perforated working surface of stainless steel. The table top SUCTION PIPE is connected with the inlet of the TRAPTANK and the outlet by means of a flexible hose to the adjustable PNEUMATIC VACUUM UNIT, Further provided with a HUMIDIFICATION DOME plus connections with a pneumatically up and down operation and an ULTRASONIC HUMIDIFYER commanded by a HYGROSTAT, a CONTROLEPANEL with SPRAY GUN,

The LIGHT TABLE-TOP is executed with a working surface is made of opal laminated tempered glass. The light compartment contains MULTY LEDS of the COLD light 5.000 Lux. Day-light colour. On-off switch and DIMM switch

 

Usable Surface Vacuumtable / illuminated surface

Working height

Outside dimensions

Electrical connection

Maximum power consumption

Compressed air consumption maximum

Exhaust connection

Noise level

Total weight

Colour

PRICE JEZET VACUUMTABLE with HUMIDIFICATION UNIT + SEPARATE LIGHT SUCTION TABLE

1300 x 800 mm / 800 x 600 mm

800 mm

W x D = 1900 x 840 mm

Euro connector with flexible cable of 10 m single phase - neutral and Earth

1,0 k Watt 16 Ampere 230 Volt – 50 Hz

350 litres per minute at 6 Bar

flexible hose of Ø 75 mm 10 meters

During suction maximum noise level of 60 dB otherwise 45 dB

approximately 85 kg

Silver and black

€    18.180,00

 

 

JEZET VACUUMTABLE SYSTEM VTTFwHdESEP-1308St + LIGHT/SUCTION TABLE LVTT-0806 built-up of the following components: a SUPPORT FRAME on 4 castors with brakes with on top a VACUUM TABLE-TOP provided with a perforated working surface of stainless steel. The table top SUCTION PIPE is connected with the inlet of the TRAPTANK and the outlet by means of a flexible hose to a triple station with one connection and valve to the adjustable ELECTRIC SUCTION UNIT and the other connection and valve to the LIGHT/SUCTION TABLE-TOP. Further provided with a HUMIDIFICATION DOME plus connections with a electrically up and down operation and an ULTRASONIC HUMIDIFYER commanded by a HYGROSTAT, a CONTROLEPANEL with SPRAY GUN,

The LIGHT/SUCTION TABLE-TOP is executed of a suction compartment with working surface made of WHITE POLYETHELENE and a light compartment with MULTY power LEDS of the COLD light 5.000 Lux. Day-light colour. On-off switch and DIMM switch

 

Usable Surface Vacuumtable / illuminated Suction surface

Working height

Outside dimensions

Electrical connection

Maximum power consumption

Exhaust connection

Noise level

Total weight

Colour

PRICE JEZET VACUUMTABLE SYSTEM VTTFwHdESEP-1308St + LIGHT/SUCTION TABLE LVTT-0806(PLUG AND PLAY)

1300 x 800 mm / 800 x 600 mm

800 mm

W x D = 1900 x 800 mm

Euro connector with flexible cable of 10 m single phase - neutral and Earth

2,2 k Watt 16 Ampere 230 Volt – 50 Hz

flexible hose of Ø 75 mm 10 meters

During suction maximum noise level of 60 dB otherwise 45 dB

approximately 80 kg

Silver and black

€    24.760,00

 

JEZET ILLUMINATED SUCTION TABLE LVTTFwSEP-1510Po built-up of the following components: a SUPPORT FRAME on 4 castors with brakes with on top a LIGHT SUCTION TABLE/WALL is composed in two compartments: 1 for vacuum and 1 for light. The vacuum compartment made of transparent polycarbonate and a rigid support platform The working surface is made of hard wearing, easy to clean non corrosive, WHITE POLYETHELENE. The light compartment is made of an Aluminum base plate and a MULTY LEDS unit of high Intensity with the COLD light 5.000 Lux. Day-light colour. The table top SUCTION PIPE is connected with the inlet of the TRAPTANK and the outlet by means of a flexible hose to the adjustable ELECTRIC SUCTION UNIT. Both fixed on the support frame base.

 

Usable illuminated surface

Working height

Outside dimensions

Electrical connection

Maximum power consumption

Exhaust connection

Noise level

Total weight

Colour

PRICE JEZET ILLUMINATED SUCTION TABLE LVTTFwSEP-1510Po (PLUG AND PLAY)

1000 x 700 mm

800 mm

W x D = 1080 x 780 mm

Euro connector with flexible cable of 10 m single phase - neutral and Earth

1,5 k Watt 16 Ampere 230 Volt – 50 Hz

flexible hose of Ø 75 mm 10 meters

During suction maximum noise level of 60 dB otherwise 45 dB

approximately 45 kg

Silver and black

€    12.975,00

 

JEZET ILLUMINATED SUCTION TABLE and WALL LVTWFwSEPHeKe90º-1510Po built up out of the following components: The LIGHT SUCTION TABLE/WALL is composed in two compartments: 1 for vacuum and 1 for light. The vacuum compartment made of transparent polycarbonate and a rigid support platform The working surface is made of hard wearing, easy to clean non corrosive, WHITE POLYETHELENE. The light compartment is made of an Aluminum base plate and a MULTY LEDS unit of high Intensity with the COLD light 5.000 Lux. Day-light colour. The size of the useful working surface of the table-top W x D 1.500 X 1.200 mm. The SUPPORT FRAME is constructed of a base frame provided with four castors with brakes. Mounted on the frame 2 linear actuators for stepless movement from up to 1150 and down to 750 mm. On the actuators is mounted a top frame to support the LIGHT VACUUM TABLE/SUCTION WALL and enables it to tilt from HORIZONTAL to VERTICAL by means of 4 hinges on the front and a linear actuator. Further on the base frame the ELECTRIC SUCTION DEVICE, PNEUMATIC VACUUM DEVICE, TRAPTANK, CONTROLEPANEL, CONTROLEBOX and connections.

 

Usable Surface for/as Illumination, Work; Suction, Vacuum, etc.

Working height variable / Step less tilting

Outside dimensions

Electrical connection

Maximum power consumption

Pneumatic connection

Pneumatic consumption

Exhaust connection

Noise level

Total weight

Colour

PRICE JEZET ILLUMINATED SUCTION TABLE and WALL LVTWFwSEPPPHeKe90º-1510Po

1500  x 1000  mm

750 to 1100 mm. / between 0º to 90º

W x D = 1600x 1200 mm

Euro connector with flexible cable of 10 m single phase - neutral and Earth

2.2 k Watt 16 Ampere 230 Volt – 50 H.z

quick release coupling and flexible hose of Ø 9 mm of 6 metres

350 litres per minute max at 10 Bar

flexible hose of Ø 75 mm 10 meters

During suction maximum noise level of 60 dB otherwise 45 dB

approximately 150 kg

Silver and black

€    29.800,00

 

 

JEZET VACUUM TABLE VTTFwHdPSEPPPHeKe45º-1310Po adjustable in Height and Angle + HUMIDIFICATION unit built up out of the following components: VACUUM TABLE-TOP is constructed of aluminum profiles and POLYETHELENE WORKSURFACE (exchangeable with a Stainless steel perforated work surface) and mounted on the TOP SUPPORT FRAME by means of 4 hinges at the front and an electric actuator permitting the vacuum table top a step less tilting between 0º to 45º The top frame is mounted on a one aluminum lifting-column with a step less height adjustment

The column is fixed on the BASE FRAME mobile on 4 castors with brakes. On the base frame are also fixed the MOISTURE OR LIQUID TRAPTANK (far better and less dangerous than an activated carbon filter, The connecting system, The ELECTRIC MEDIUM PRESSURE SUCTION UNIT a suction level of -40kPa on a big surface. The PNEUMATIC VACUUM UNIT a suction level of - 80kPa , The ULTRASONIC HUMIDIFER.

The TURNABLE CONTROLEPANEL is built on the front of the table top and executed with 24 Volts safety current and the necessary equipment

The higher HUMIDIFICATION DOME is made of aluminum profiles and transparent POLYCARBONATE and mounted on to the table top by means of 2 hinges and also provided with a HYGROSTAT mounted in the dome of the Vacuum table to control the ULTRASONIC HUMIDIFER. Furthermore executed with a LOW PRESSURE SPRAY GUN with flexible hose and quick release coupling

 

Working; suction; area

Area height and tilting

Outside dimensions

Electricity consumption maximum

Exhaust air outlet

Noise level maximum

Total weight

Colour

PRICE JEZET VACUUM TABLE VTTFwHdPSEPPPHeKe45º-1310Po

1300 x 1000 mm

800 to 1100 mm. and 0 to 45º

W x D x H =1380 x 900 x 1500 mm

2,2 k Watt 240V – 50hz 1 Phase

Ø 75 mm flexible synthetic hose 5 meters

with operating suction device 60 dB. Otherwise 45 dB

approximately 175 kg

Silver and black

€    29.760,00

 

The JEZET SUCTION BOOK WEDGE VBW-0302StS is constructed of a perforated working surface made of hard wearing, easy to clean non corrosive, stainless steel permitting a maximum mesh of 35% per square meter and a closed stainless steel base. The BOOK WEDGE rear side is formed by a stainless steel suction pipe which can be left or right connected with a suction unit or vacuum cleaner.

The size of the useful working surface is W x D 300 X 240 mm. outside dimensions 360 x 260 mm. height 3 to 35 mm

PRICE JEZET BOOK WEDGE VBW-0302StS

€    890,00

The JEZET ILLUMINATED SUCTION BOOK WEDGE LVBW-0302Po is constructed of a porous working surface made of white Polyethylene permitting a maximum mesh of 28% per square meter. and a closed base made of white Polyethylene. On both sides at the rear end are suction pipes which can be connected with a suction unit or vacuum cleaner.  The BOOK WEDGE rear side is formed by a transparent polycarbonate plate and can be provided with a MULTY LEDS unit of high Intensity with the COLD light 5.000 Lux. Day-light colour. Or an already existing light unit of low temperature. No halogen to hot

The size of the useful working surface is W x D 300 X 240 mm. outside dimensions 360 x 260 mm. height 7 to 40 mm.

 

PRICE JEZET ILLUMINATED SUCTION BOOK WEDGE LVBW-0302Po (WITHOUT LED LIGHT UNIT)

PRICE JEZET ILLUMINATED SUCTION BOOK WEDGE LVBW-0302Po WITH LED LIGHT UNIT

€        630,00

€    1.345,00

The treatments can be divided on to 3 different surface sizes and 3 vacuum generations each with its special qualities as: usability, capability,  adaptability, performance and advantages.

 

Large surface for hold down, mostly

Combined surface for flatting and spraying

Small surface for spot treatments

Combined surface use dangerous liquids and/or inflammable solvents

low suction force

middle suction force

vacuum

middle suction force

high airflow

high airflow

low airflow

high airflow

ELECTRIC

ELECTRIC

PNEUMATIC

WATER-POWERED

CENTRIFUGAL FANS or EXHAUSTERS

RADIAL PUMP or ROTARY VANE PUMPS

MULTI STAGE EJECTOR

WATER-JET EJECTOR

EXECUTION

size(small/medium/big)                                                                       working-height(standing/seated);                                                                treatment-surface material(Aluminum/Stainless steel/Plastic/Brass)

strength(vacuum/suction force)                                                          stability(rigid profile frame)                                                                           corrosion durability(treatment-liquid/solvent resistance)

mobility(on wheels/steady)                                                                  fixed or tiltable(manually, pneumatic)                                                       weight(light weight construction and material)

floor(space, load)                                                                                   restoration-workshop (building, access, doors)                                    design (compact; ergonomic and easy to clean)

 

TREATMENTS

accessibility(one side or on all sides)                                              treatments with inflammable solvents (cooled surface, cold air supply, traptank, cooling labyrinth, explosion proof suction necessary)

humidification(polycarbonate dome and humidifier)                     readings(vacuum-gauge, pressure-gauge, thermometer, hygrostat)

conditioned air supply(filter and conditioner)                                  additional connections( hygrostat, spray-gun, compressed air)

hot lining (heated surface or heated air supply)                              adapting of/to existing components(suction/vacuum unit, table, under frame, extraction, etc)

 

The ADVANTAGES of the JEZET VACUUM TABLE SYSTEMS

one component to total set-up or only for a particular treatment (custom made)                                         adaptable to or integration into already existing components or systems (special requests)

All inert materials and components                                                                                                                                handy and mobile by light, strong, rigid construction of aluminum profiles.

various vacuum devices - vacuum-, power- and airflow regulations                                                                   small internal volumes therefore fast build up of the vacuum (electric/pneumatic)

no heat emission (pneumatic)                                                                                                                                         spark-proof interior and exterior

solvent resisted                                                                                                                                                                       solvent collecting system (in quantity)

low noise level and easy to clean                                                                                                                                     multifunctional use or just specific application

 

JEZET SUCTION and VACUUM TABLES SYSTEMS

 

MINI SUCTION TABLE TOPS (100 X 100 mm) to MULTIFUNCTIONAL VACUUM TABLE SYSTEMS totally adjustable in height, angle and surface

 

The first JEZET SUCTION table systems from 1983 were mostly to use of hold-down low pressure suction, for the spraying of deacidification-liquids on acid paper and little restoration work. Later on with low pressure suction; medium pressure suction; vacuum up till even high vacuum for all kind of purposes, treatments and actions like:

rinsing; washing; bleaching; deacidifying; disinfecting; moistening-treatments; humidifications; tape -or stain removal; vellum flatting-, supplying-treatments; lining; hot-lining; sizing; strengthen; straining; stretching; paper splitting; spot casting; spot fibering.etc.

Making use of all sorts of treatment liquids, solvents; fumes, glues, waxes and pastes. To do special treatments on different materials like: PAPER, TEXTILE, VELLUM, LEATHER, OILPAINTING etc.

 

 

The treatments can be divided on to 3 different surface sizes and 3 vacuum generations each with its special qualities as: usability, capability,  adaptability, performance and advantages.

 

 

Large surface for hold down, mostly

Combined surface for flatting and spraying

Small surface for spot treatments

Combined surface use dangerous liquids and/or inflammable solvents

low suction force

middle suction force

vacuum

middle suction force

high airflow

high airflow

low airflow

high airflow

ELECTRIC

ELECTRIC

PNEUMATIC

WATER-POWERED

CENTRIFUGAL FANS or EXHAUSTERS

RADIAL PUMP or ROTARY VANE PUMPS

MULTI STAGE EJECTOR

WATER-JET EJECTOR

EXECUTION below

click here

TREATMENTS below

click here

ADVANTAGES of the JEZET VACUUM TABLE SYSTEMS below

click here

The JEZET VACUUM TABLE-TOP VTT-0404Po is constructed of anodized softline profiles JZ800 with a inserted shaped base-plate, a rigid heavy duty support grid all made of aluminum to restrain even a higher vacuum (maximum of  -90 kPa abs. = 125 mBar. = 27 inch Hg) and a porous working surface made of white Polyethylene permitting a maximum mesh of 28% per square meter. The table top rear side is provided with an aluminum suction pipe to be connected with a suction or vacuum unit. The size of the useful working surface is W x D 400 X 400 mm. outside dimensions 440 x 440 mm. height 40 mm.

PRICE JEZET TABLE-TOP VTT-0404Po                                                                                                                                                                                                              €    780,00